[time-nuts] HP5065A Rubidium questions: some progress
cdelect at juno.com
cdelect at juno.com
Tue Feb 21 02:39:03 UTC 2017
Scott,
The resistor should be 12 Ohms nominal, I'd try installing a 12 Ohm and
see what happens.
The lamp should light within 10 seconds or so of applying power.
If you have a spectrum analyzer you can place a loose wire close to the
lamp assy and see the approx 120Mhz signal if it's oscillating!
The lamp will be a whitish color when cold and a more reddish violet if
hot.
Cheers,
Corby
More information about the Time-nuts_lists.febo.com
mailing list