[time-nuts] Tom's PICDiv?

[John Ackermann N8UR]

Hi Bob --

TAPR has two boards that provide life support for Tom's PICDiv chips:

The "TADD-2" is a six-channel divider allowing each channel to have its 
rate independently set from a common source:
https://www.tapr.org/kits_tadd-2.html

The "T2-Mini" is a tiny board that provides a single channel of PPS (or 
whatever you want) from an RF input:
https://www.tapr.org/kits_t2-mini.html

John
----


On 1/5/2017 12:34 AM, Bob Stewart wrote:
> Hi all,
> I was wondering if anyone makes a nice, complete unit from one of Tom's PICDivs; preferably with an external 10MHz input, a 10MHz output and a 1PPS output?  It would be nice if it also accepted a 1PPS in to sync the PIC's output to an external 1PPS source, but that's not a necessity.  I've got something kludged together here that I can drive from my Cs standard for testing, but I was hoping for something a bit more purpose made if anyone makes one?  Not looking for a kit or just a board, nor do I have any interest in making/marketing such a unit.
>
> Bob -----------------------------------------------------------------
> AE6RV.com
>
> GFS GPSDO list:
> groups.yahoo.com/neo/groups/GFS-GPSDOs/info
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>