[time-nuts] 10MHz to 25MHz

Loren Moline WA7SKT lmoline at hotmail.com
Thu Jan 19 02:43:40 UTC 2017


Thanks Bob


Loren Moline  WA7SKT

Member: Pacific Northwest VHF Society and ARRL
Member: Hearsat Satellite Monitoring Group.  www.uhf-satcom.com
Member: CVARS-Chehalis Valley Amateur Radio Society
Starchat IRC: Channel = #hearsat
RF Electronics: Starchat IRC: Channel = #rfelectronics
Grid: CN86mr


________________________________
From: time-nuts <time-nuts-bounces at febo.com> on behalf of Bob Camp <kb8tq at n1k.org>
Sent: Wednesday, January 18, 2017 6:08 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] 10MHz to 25MHz

Hi

What are you going to use the 25 MHz for? Will it drive any sort of radio? If so, cleaning up the phase
noise of the GPSDO is a *very* good idea. With a PLL, you can *subtract* noise. With a multiplier you
can only *add* noise. The narrow bandwidth PLL combined with a low nose VCXO is your friend in this case.

I would take the process one step further. I'd lock up a 100 MHz VCXO to the 10 MHz. Then you can get
100, 50, 25, and 20 MHz outputs. The 100 MHz is the key if you want to head up into the microwave
region.

Bob

> On Jan 18, 2017, at 8:40 PM, Loren Moline WA7SKT <lmoline at hotmail.com> wrote:
>
> Are you talking about locking the 50MHz VCXO to my 10 MH. Standard? I want the 25MHz to be from my 10MHz OCXO which is my station standard which will locked to GPS eventually.
>
> Loren WA7SKT
>
>
>
>
> On Wed, Jan 18, 2017 at 4:01 PM -0800, "Richard (Rick) Karlquist" <richard at karlquist.com<mailto:richard at karlquist.com>> wrote:
>
>
> A better and easier way is to phase lock a crystal oscillator.
> I would use a 50 MHz VCXO and divide the output by 2 to get a
> 25 MHz square wave.
>
> Rick N6RK
>
> On 1/18/2017 10:28 AM, Loren Moline WA7SKT wrote:
>> Hello,
>>
>> I am looking for a good X5 multiplier to use to generate a 25MHz signal from my 10MHz OCXO. I want to divide by 2 and multiply by 5 with a bandpass filter in the output and then a 3.3 volt 25MHz signal out.
>>
>>
>> Maybe someone has better ways?
>>
>>
>> Loren Moline  WA7SKT
>>
>> Member: Pacific Northwest VHF Society and ARRL
>> Member: Hearsat Satellite Monitoring Group.  www.uhf-satcom.com<http://www.uhf-satcom.com>
UHF-Satcom.com - The #1 online resource for VHF to EHF satellite reception and monitoring<http://www.uhf-satcom.com/>
www.uhf-satcom.com
UHF-Satcom.com - the online place for VHF to EHF satcom monitoring uhf vhf shf ehf ku-band c-band p-band l-band s-band x-band



>> Member: CVARS-Chehalis Valley Amateur Radio Society
>> Starchat IRC: Channel = #hearsat
>> RF Electronics: Starchat IRC: Channel = #rfelectronics
>> Grid: CN86mr
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.



More information about the Time-nuts_lists.febo.com mailing list