[time-nuts] RS232 output on a 53181A
Bob kb8tq
kb8tq at n1k.org
Wed Jul 12 18:54:56 UTC 2017
Hi
There may well be multiple EEROM’s in the 53181 and 5313x counters. At least
when I have blown up the EEPROM in them, it comes back with a error. I haven’t
blown any up since the early 1980’s so I don’t quite remember the exact error
message involved. Had it simply failed silently, I would have never noticed the problem.
Bob
> On Jul 12, 2017, at 10:39 AM, Angus <not.again at btinternet.com> wrote:
>
> Hi,
>
> I've just been using an Agilent 53181A, but the serial output is not
> quite what I had expected. On the 53131A's that I've used the
> placeholder character on the RS232 output is an asterisk, but with
> this unit it is a lower case 'p'. Where the 53131A sends '2,*** u',
> this 53181A send '2,ppp u'. The only references to a placeholder that
> I saw in the manuals referred to an asterisk.
>
> The firmware version is 4613.
>
> Anyway, just wondering if anyone knows if this is correct, or maybe
> it's just the EPROM starting to fail.
>
> Thanks,
> Angus.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list