[time-nuts] Time Dilation tinkering
jimlux at earthlink.net
Wed Mar 22 10:56:45 EDT 2017
On 3/22/17 4:04 AM, Angus wrote:
> On Tue, 21 Mar 2017 13:08:56 +0100, you wrote:
>> On Tue, 21 Mar 2017 13:38:51 +1100
>> Hugh Blemings <hugh at blemings.org> wrote:
>>> This got me to wondering if a Rubidium based standard might do the trick
>>> - the Efratom SLCR-101s seem readily available for ~USD$200 mark.
>> As TvB wrote, a single one will not do the trick. You will need
>> a stability 1e-14 @1d. IIRC most Rb standards floor out at 1e-12 to 1e-13
>> somewhere between 1k and 100k seconds. Even the Super-5065 has a floor
>> of about 3-4e-14 (unless our friends here improved on this already).
>> There will be a few things that you will need to do, if you want to go
>> with Rubidiums:
>> 1) Stabilize or compensate for environmental effects (temperature, air pressure)
>> 2) Build ensembles of Rb clocks.
> Looking back at an old plot I did of a temperature controlled and air
> pressure compensated LPRO against an M12+T, the Hadamard Deviation of
> the 1000s averages of the 1PPS measurement was about 5E-14 at 1 day.
> A large part of that was likely the GPS, so with a better rubidium
> like an FRK-H in a sealed and temperature controlled enclosure you
> might be around 1E-14 at 1 day.
> The bit that I'm not so sure about is the travelling. A long period of
> movement, vibration, magnetic fields, etc. all adding in could
> obscure the effects of time dilation.
> It might be quite possible, although a nearby mountain and a friend
> with a helicopter would make it a lot easier!
No tall mountains in Australia, but...
Pikes Peak in the US is 14114 ft, 4304m and has a road to the top. Of
course the base is at about 5000 ft/1600 m
In EU, there's probably a Seilbahn of some sort pretty high up in the
Alps, although probably not to 4000m.
More information about the time-nuts