[time-nuts] GPS Kit Plates

[Gregory Beat]

Jerry -

Yes, from the GPS DE-9M connector to the PC (RS-232) and the DC power source.
I have been DIY building D-subminiature cables since 1980 (parts not an issue).

The SynPaQ/E version XTS (DE-9M) pin assignments are "non-standard" (not RS-232) and include DC power input, as well as 1 PPS output.  The wiring configuration is from the original Motorola "XT" Oncore and Synergy’s “XTS/II” OEM GPS Sensors (1990s).
This SynPaQ/E DE-9M wiring provides backward compatibility and a single connection for data I/O and DC power.
https://www.tapr.org/pdf/tapr-gps-kit.pdf

greg, w9gb

Sent from iPad Air

> On May 27, 2017, at 4:14 PM, Jerry Hancock <jerry at hanler.com> wrote:
> 
> Greg, to which adapter cable are you referring?  From the PC to the DB9?
> 
> What I did in the meantime was use breadboarding jumpers.  The square female ends typically will press onto the DB9 male pins.
> 
> Glad they fit your need.
> 
> Steve, sounds like there won’t be another round?
> 
> Jerry
> 
>> On May 27, 2017, at 2:04 PM, Gregory Beat <w9gb at icloud.com> wrote:
>> 
>> Steve and Jerry -
>> 
>> Thank you for coordinating the acquisition and machining of these End Panels for the TAPR GPS Experimenters Kit.  I understand these kits (SynPaQ/E version XTS) are EXHAUSTED at TAPR.  Check the TAPR web site for details.
>> https://www.tapr.org/gps_exp-kit.html
>>