[time-nuts] Lucent RFTG-u REF0-REF1 cable

Jerry Hancock jerry at hanler.com
Tue Nov 14 06:07:33 UTC 2017


Yes, the cable is pretty easy, basically DB15 pin 1 to 15; 2-14; 3-13; 4-12; 5-11; 6-10; 7-9 and 8 to 8 followed by 9-7; 10-6; 11-5; 12-4; 13-3; 14-2; 15-1.  If you do a search for "Lucent RFTG-U" and look around on time-nuts you will find it laid-out in a little more detail.  I was just looking again and it always takes some screwing around to find it.  If all else fails, send me a note and I’ll dig it up when I go to make mine.

This will be my second set of the units.  They just seem to hum along since I’ve had them 18 months.  I use a passive outboard distribution unit and can easily drive 16 devices.

Regards,

Jerry

> On Nov 13, 2017, at 8:50 PM, Jerry Hancock <jerry at hanler.com> wrote:
> 
> Anyone have a spare cable for the Lucent setup?  I guess I can make one with some DB15 connectors but trying to skip the effort.
> 
> Thanks
> 
> Jerry
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.




More information about the Time-nuts_lists.febo.com mailing list