[time-nuts] HP5065A C-field mods and optical unit mods
Charles Steinmetz
csteinmetz at yandex.com
Tue Nov 21 11:31:25 UTC 2017
Luciano wrote:
> about the C field ten turn pot you write is a low TC pot. Normally a good Vishay pot is 20 PPM/C, This is in conflict with the 1PPM resistors ad voltage reference.
In the schematic Corby posted, the potentiometer (used as a variable
resistor) makes up a very small part of the total resistance of the
series string, so the overall tempco is dominated by the tempcos of the
fixed resistors (2.4k to 4.4k 1ppm/ C, depending on trim). The pot will
increase the overall tempco a little bit, but not anywhere near 20ppm.
Best regards,
Charles
More information about the Time-nuts_lists.febo.com
mailing list