[time-nuts] TS2100: List of root commands?

Gerhard Wittreich gerhard at wittreich.org
Thu Apr 5 10:41:46 EDT 2018


Bruce,

The link Azelio Boriani shared is the source I used when doing the same
project. Please, post your results. MIne has been running for several years
now without any issues. I track the OCXO control voltage register in the
2100. It has 65535 steps and over long periods (1 year) that control
voltage hasn't changed. At the very beginning, it did take about 30-60 days
for the control voltage to settle down. The only time I get a change is in
rare situations where the unit is powered down. When it restarts it may
settle into a different control voltage. I have the unit on a UPS and have
backup generator for the house.

Gerhard R Wittreich, P.E.

On Wed, Apr 4, 2018 at 8:29 PM, Bruce Lane <kyrrin at bluefeathertech.com>
wrote:

> Fellow time-tickers,
>
>         I just finished conversion of one of my TS2100's to OCXO, and I'm
> now
> in the process of tweaking the EEPROM settings.
>
>         During my research, I came across (and, foolishly, didn't bookmark)
> either a web page or a mailing list post which listed the 'root eng'
> commands, and exactly how to enter them. I've been successful with 'root
> eng ee gain' and 'root eng ee filter,' but I can't seem to get the
> syntax down to set the D/A value.
>
>         Does this sound at all familiar?
>
>         Thanks much.
>
> --
> ---
> Bruce Lane, ARS KC7GR
> http://www.bluefeathertech.com
> kyrrin (at) bluefeathertech dot com
> "Quando Omni Flunkus Moritati" (Red Green)
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>



More information about the time-nuts mailing list