[time-nuts] new op amp for distribution amplifiers
Richard (Rick) Karlquist
richard at karlquist.com
Mon Dec 17 15:20:57 UTC 2018
So the THS3491 is an LMH6702 replacement except
for a slightly elevated noise floor. Why would
anyone not want to use the LMH6702? What does
the THS3491 have going for it?
Rick
On 12/16/2018 11:02 PM, John Miles wrote:
>> -----Original Message-----
>> From: time-nuts [mailto:time-nuts-bounces at lists.febo.com] On Behalf Of
>> Anders Wallin
>> Sent: Saturday, December 15, 2018 9:03 AM
>> To: Discussion of precise time and frequency measurement
>> Subject: Re: [time-nuts] new op amp for distribution amplifiers
>>
>> Hello Gerhard, everyone,
>>
>> I made a test using the THS3491 on a slightly modified PCB from my "FDA"
>> design [1]...
>
> A few more notes on the THS3491:
>
> http://www.ke5fx.com/ths3491.htm
>
> I had tested it a few weeks ago, but hadn't gotten around to gathering and sorting through the plots.
>
> -- john, KE5FX
> Miles Design LLC
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>
>
More information about the Time-nuts_lists.febo.com
mailing list