[time-nuts] Furuno GT-8031 breakout board

Bob Darlington rdarlington at gmail.com
Thu Feb 15 18:55:27 UTC 2018


I bought some of the Furuno GT-8736 boards for $35 a pop, qty 1 (or 2 as
was the case).  And was quoted at $26.91 a pop if I buy 100.   If there's
interest, I'm happy to coordinate a group buy at cost.  Just paid off that
credit card yesterday so why not?   If there are more desirable boards from
Furuno, let me know and I'll see what I can do.

-Bob

On Thu, Feb 15, 2018 at 3:59 AM, ew via time-nuts <time-nuts at febo.com>
wrote:

> Talking about Furuno has any one looked at the GT-87. I have known about
> it for years but found no way to buy some now DigiKey has them for $ 100,
> Buerklin in Germany for half that price. Saw tooth is +- 1.7 nsec we are
> not going to bother with correction. We are in the process to lay out a
> board any recommendations are appreciated
> Bert Kehren
>
> In a message dated 2/15/2018 12:39:48 AM Eastern Standard Time,
> holrum at hotmail.com writes:
>
>
>  I just did a small adapter board that converts the 2x5 pin 2mm header on
> the Furuno GT-8031 to a 1x9 pin 0.1" connector with the pinouts of the
> Adafruit Ultimate GPS. There a couple of minor pin differences... the
> Adafruit FIX pin is not used and the Adafriuit 3.3VREG output pin is used
> as the Furuno antenna power connection. The Furuno can be soldered to the
> board or a female connector could be installed.
>
> I'm getting ready to order a few boards. If interested, contact me off
> list._______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>   1 Attached Images
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>



More information about the Time-nuts_lists.febo.com mailing list