[time-nuts] The "NAKED" 5065A optical unit
Poul-Henning Kamp
phk at phk.freebsd.dk
Tue Feb 20 09:30:54 UTC 2018
--------
In message <AABPJY7PFAJKDQYS at smtpout01.dca.untd.com>, cdelect at juno.com writes:
>Here is a PIX of the optical unit from a 5065A totally removed from the
>shield assembly.
Nice!
>Left to right:
>
>Lamp assy
>lamp oven cylinder
>lamp reflector/convection block/diffuser
>Rb85 filter cell
It looks like there is a square filter of some kind
between the reflector and the filter cell ?
I've been thinking a little bit more about power for the lamp assembly.
Since I have the lamp on the bench-supply I am going to plot lamp
voltage vs. photo-I because it looks like a threshold rather than
a linear relationship.
If that is the case, I think it will make sense to give the lamp
its own adjustable voltage regulator (LM317), so the power can be
reduced to what is optimal/necessary without having to take the
lamp apart and change a resistor.
A 1R resistor between the 22-30V supply and the LM317 will make it
easy to monitor lamp current, and a 300mA short-circuit protection
is a nice bonus.
If need be, the regulator could start out at 20V and drop to something
lower in a matter of minutes.
Actually, now that I think about it, I should try to measure if it
is gives better stability if I drive the lamp with constant current,
constant power, constant voltage or constant photo-I...
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
phk at FreeBSD.ORG | TCP/IP since RFC 956
FreeBSD committer | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained by incompetence.
More information about the Time-nuts_lists.febo.com
mailing list