[time-nuts] Replacement A9 boards for the HP 5065A

[paul swed]

Well all this capacitor talk has me actually looking for the 5 uf cap.
When I picked up the 5065a it didn't work. This was in the late 90s and no
manual was available at that time.
I reverse engineered the system and guess what cap was bad? The integrator.
So not being all that smart, I hooked 2 X 10 UF caps in series. Been
working like a champ for 18 years.
Not obvious of what the downside of this approach was at all.
But I went out to mouser and have to say the selection of large capacitors
really is thin for PPS and PS. I did see the one picture of a yellow cap I
think from Germany.
The question really is what is the source and part number for a good cap.
does appear that the wima caps are carried by Mouser but may have long lead
times.
Regards
Paul
WB8TSL

On Sun, Feb 25, 2018 at 2:50 PM, Gerhard Hoffmann <dk4xp at arcor.de> wrote:

>
>
> Am 25.02.2018 um 13:46 schrieb Azelio Boriani:
>
>> The part number BFC234421475, on <http://www.wima.com.ua/BFC234421475>
>> seems to be a Philips product, 2500 available, for 49.28 UAH
>> (Ukrainian Hryvnia, that is 1.77 USD). A mysterious capacitor...
>>
> Why not go to Mouser or DK, as usual?
>
> Or to the source itself:
> <  https://www.wima.de/en/  >
>
> (Abt. an hour of driving from where I'm now).
>
> BTW last time I bought some at DK/Mouser, there was
> a pricing artefact, in that 5% was cheaper than 10%
>
> :-)  Gerhard
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/m
> ailman/listinfo/time-nuts
> and follow the instructions there.
>