[time-nuts] AM vs PM noise of signal sources
Arnold Tibus
arnold.tibus at gmx.de
Sun Jan 7 16:05:14 UTC 2018
Am 07.01.2018 um 16:33 schrieb jimlux:
> On 1/6/18 6:12 PM, Dana Whitlow wrote:
>> One point about oscillator design I've not yet seen mentioned is this:
>> the
>> limiter
>> must not degrade the resonator Q when in action. Hence, a pair of diodes
>> connected in parallel back to back, across a shunt resonator, would be
>> a bad
>> thing to do from the perspective of low phase noise. A differential
>> amplifier
>> that limits by running out of current on peaks, driving a shunt
>> resonator,
>> is
>> a much better way even though one pays a price in having more transistor
>> noise in the circuit.
>>
>> I've long wondered if a very slow AGC might avoid the nonlinear
>> mechanisms
>> issue except, of course, for things happening within the AGC loop's
>> bandwidth.
>
>>
>
> That's the Wein bridge stabilized by a light bulb, popularized by Messrs
> Hewlett and Packard a while ago.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.comgents,
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
Hello everybody, excuse me please,
but I see quite often mentioned the 'Wein bridge'. (Wein in german is
'vino' or 'wine' ;-)
Not of real technical importance, but shouldn't this not be correctly
called a 'Wien bridge'?
As I know that this tricky circuit was developed by Max Wien in 1891.
Max Karl Werner Wien was a German physicist and the director of the
Institute of Physics at the University of Jena at that time.
(sorry, I am a nut ;-) )
My best wishes for 2018 to everybody,
Arnold, DK2WT
More information about the Time-nuts_lists.febo.com
mailing list