[time-nuts] Need help machining an Aluminum cylinder

[Scott McGrath]

I can do it, on east coast though

Content by Scott
Typos by Siri

On Jul 12, 2018, at 6:13 PM, Rhys D <heyrhys at gmail.com> wrote:

If you get stuck, I can help. I am in New Zealand though, so postage may be
a concern.

On Fri, 13 Jul 2018 at 6:36 AM, <cdelect at juno.com> wrote:

> Hi,
> 
> I remember a few that had machine shops volunteering to help with
> machining last year but can't remember who!
> I have a 2 and 3/8" diameter cylinder 1.45" long.
> It needs nine  1/6" deep X 1/16" wide grooves machined in the
> circumference and adding some length to a slot already existing running
> down the side.
> This is to try another way to rebuild the HP 5065A Lamp oven.
> 
> Can anyone help?
> 
> Cheers,
> 
> Corby
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
> 
_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.