[time-nuts] Question about Lady Heather millisecond display

Michael Baker mpb45 at clanbaker.org
Wed Jun 6 14:07:36 EDT 2018


Hello, Time-Nutters----

I recently updated an old version of Lady Heather that has been
running well 24/7/365 for a number of  years (except during
prolonged power grid outages !).  V5.0 is now installed and running.
Getting it to display full-screen takes a bit of fiddling with different
commands but otherwise seems to be running OK.

I do have a number of questions about V5.0 but one I am focusing
on at the moment is the command to enable the millisecond digits
for the time display.  The info I have says this is done by entering the
  /TSZ  command.  However, when entering this command the three
millisecond digits do appear but only alternate back and forth every
several seconds between "052"  and "053".  What might I be doing
wrong?

Any suggestions on how to make the millisecond digits count and
sequence correctly?

Thanks for any suggestions on resolving this issue !!

Mike Baker
Micanopy, FL
*********************




More information about the time-nuts mailing list