[time-nuts] TymServe TS2100 dead power supply

[Luke Shepherd]

Bob,
Just a reminder, as it came from the factory, this unit has a week rollover
issue unless it has been upgraded.  Check out the TN archives and Google
for the upgrade fix suggestions. (mine was in a production installation
when the rollover occurred, and the resulting pain seems to be forever
etched in my mind.)


Luke.

On Mon, Mar 5, 2018 at 7:52 PM, Bob Martin <k6rtm at comcast.net> wrote:

> We had a brief power outage a few days ago.
>
> My TS2100 didn't power up afterwards. Fuses are fine, AC power delivered
> to power supply, which is producing nothing. Nothing looks/smells fried on
> the power supply.
>
> Couldn't find data on what the power supply output voltages should be; not
> in the meagre documentation, .
>
> I'd appreciate help from someone with a TS2100 while I look for faults in
> this little switching power supply. Looks like three voltages, +5 and what
> else? Is this a more or less standard supply?
>
> Appreciate any help I can get!
>
> Bob K6RTM
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>