[time-nuts] Ultralink WWVB receiver manuals?

[Hal Murray]

>From info for a 332A, YMMV, etc...

>  (a) is the 6P6C modular cable 
> connecting the receiver and decoder straight, or reversed

Receiver/decoder cable RJ11-4/6 wired pin 1 to pin 1 - 500
                       feet maximum length

> (b) what are the four DIP switches on the back of the 333 used for?

Option switches - 4 position dip switch provides installed
option selection as follows:
1        Battery backup - ON is enabled
2        Report time each second - ON is enabled
3,4      Reserved

Backup Battery Enable
Upon power up, place Option Switch 1 in the ON
position to enable RTC battery backup. During ship-
ment and periods of no use, set this switch to OFF to
avoid battery cell reversal.

Reset
The decoder may be reset by removing power and
setting Option Switch 1 to OFF for a few seconds.


-- 
These are my opinions.  I hate spam.