[time-nuts] Help Identifying this surplus Timing Module

[Bob kb8tq]

Hi

The big chip with the sticker on it is an Altera FPGA. A picture of the back
side might help a little (if there is anything on the back side …).

Simple answer - it’s a nice source of parts ….

Bob

> On May 11, 2018, at 7:16 PM, CubeCentral <cubecentral at gmail.com> wrote:
> 
> Hello All!
> 
> 
> 
> I would like to enlist your help in identifying this "surplus Timing
> Module":  https://imgur.com/a/Psw8gP7 
> 
> 
> 
> All the hints I've been given are:
> 
> - Purchased about a decade ago
> 
> - Might use a Motorola DSP as the processor
> 
> 
> 
> A quick google search lead me to a possible description:
> 
> "High speed, hitless, ultra low jitter timing module for OC-N line
> interfaces:  The TF Systems / ATiMe-LC is a timing reference source for OC-N
> and STM-N interfaces. It complements TeraSync's central timing modules to
> provide a complete and redundant timing solution at the system level."
> 
> 
> 
> ...but I'm unsure if that is 100% the same module.  If you would like to get
> some different photos, please let me know and I will see what I can do.  Any
> thoughts or ideas would be greatly appreciated!  Thanks!
> 
> 
> 
>                -Randal   (at CubeCentral)
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.