[time-nuts] Tektronix FCA3103 ADEV measurement tau setting problem

Bob kb8tq kb8tq at n1k.org
Wed May 30 12:23:44 EDT 2018


Hi

Any time I have tied a 53132 into TimeLab, I’ve used the serial port. That does a fine 
job of “talk only” data dump.

Bob

> On May 30, 2018, at 12:18 PM, Richard (Rick) Karlquist <richard at karlquist.com> wrote:
> 
> 
> 
> On 5/28/2018 1:44 PM, Bob kb8tq wrote:
>> Hi
>> TimeLab will work with some counters and it will do most of the common plots. It is indeed free …..
>> Bob
> 
> The TimeLab manual says it will support any counter that can
> dump data in Talk Only mode.  The Tek manual doesn't mention
> Talk Only mode.  The TimeLab manual also (vaguely) says it
> will support the HP53132, but doesn't specify if this is
> simply referring to Talk Only mode, or a more complete interface.
> The Tek manual says that it has a 53132 compatibility mode
> available over GPIB using SCPI commands.  If the TimeLab
> interface uses SCPI as well, I might be in business.  Does
> anyone know about that?
> 
> Rick N6RK




More information about the time-nuts mailing list