[time-nuts] TBOLTMON Error Message
Tom Van Baak
tvb at LeapSecond.com
Fri Nov 16 15:42:32 UTC 2018
I checked the TBoltmon files at http://leapsecond.com/pages/tbolt/ and they're fine.
Grab a new copy if you suspect something wrong on your end.
The usual reason that you get a com port error is that the port doesn't exist, or that it's beyond com16.
Does this old computer have native com ports or are you using a serial/USB adapter?
Look in the device manager (devmgmt.msc) to find the actual port number.
If you have a valid port number but you don't trust the serial adapter, jumper pins 2 and 3 and then use hyper terminal (hypertrm.exe) to see if the loopback works.
/tvb
----- Original Message -----
From: "Richard Solomon" <w1ksz at outlook.com>
To: "time-nuts" <time-nuts at lists.febo.com>
Sent: Thursday, November 15, 2018 7:22 AM
Subject: [time-nuts] TBOLTMON Error Message
> I downloaded a copy of TBOLTMON and installed it. When
> I try to open it I get a Com Port Error Message no matter
> which port I try (#1 through #16).
> The computer has a Windows XP O/S.
>
> I also tried it on another computer with a Windows 10
> O/S and get the same results.
>
> Perhaps I got a corrupted copy ??
>
> Any suggestions ?
>
> Thanks, Dick, W1KSZ
>
> ps: any other T-Bolt monitoring programs I can try ?
>
> Sent from Outlook<http://aka.ms/weboutlook>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list