[time-nuts] PRS10 case temperature
Dana Whitlow
k8yumdoober at gmail.com
Fri Nov 16 23:50:27 UTC 2018
My PRS-10 (a telecom version) runs with a heatsink temp of around 55C of
a bit less. But some areas of the case actually run a few deg hotter than
that.
Dana
On Fri, Nov 16, 2018 at 3:49 PM Mark Sims <holrum at hotmail.com> wrote:
> My case temp runs around 70C with the SRS heatsink installed. If you
> don't have a heatsink (a rather bad idea) it might run 80C. The latest SRS
> heatsinks don't seem to be as good as the earlier units which had a lot
> more metal to them... my heatsink is the later model.
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>
More information about the Time-nuts_lists.febo.com
mailing list