[time-nuts] HP Cesium Power Cords

Glenn Little WB4UIV glennmaillist at bellsouth.net
Mon Nov 19 16:12:40 UTC 2018


Bill Perry Company should also have them
He should be cheaper with the same quality.
Bill is easy to deal with but has no web presence.
You have to call (502) 893-8724.

I have dealt with him over the phone and at ham fests.
He is very knowledgeable about all types of connectors.

Glenn
WB4UIV

On 11/19/2018 10:31 AM, paul swed wrote:
> I have used the Galco connectors and they work well. Grab a new power cord
> for nothing and cut the EIJ C14 side off and use that. That way the
> connector and cord are brand new.
> I find older cords tend to deteriorate after 30 years.
> Regards
> Paul
> WB8TSL
>
> On Mon, Nov 19, 2018 at 10:25 AM J. L. Trantham <jltran at att.net> wrote:
>
>> If all you need is the connector, they are available from Galco.  The
>> connector is:
>>
>> https://www.galco.com/buy/Fujikura-Formerly-DDK/dms3106a18-22s
>>
>> or
>>
>> https://www.galco.com/buy/Fujikura-Formerly-DDK/DMS3106A18-22S-F
>>
>>
>> The strain relief is:
>>
>> https://www.galco.com/buy/Fujikura-Formerly-DDK/dms3057-10a
>>
>> or
>>
>> https://www.galco.com/buy/Fujikura-Formerly-DDK/DMS3057-10A-F
>>
>>
>> The first item in each category is green, the second is black.
>>
>> Hope this helps.
>>
>> Joe
>>
>>
>>
>> -----Original Message-----
>> From: time-nuts [mailto:time-nuts-bounces at lists.febo.com] On Behalf Of
>> Donald E. Pauly
>> Sent: Sunday, November 18, 2018 8:04 PM
>> To: time-nuts at lists.febo.com; Donald E. Pauly
>> Subject: [time-nuts] HP Cesium Power Cords
>>
>> For those needing hard to find power cords for HP cesium standards
>> they can be found at https://www.ebay.com/itm/132858288506 .
>> These cables are for 120 V ac 60 Hz power.
>>
>> While some HP5065A rubidium standards use the same power cord, not all
>> do.  Beware and see http://leapsecond.com/museum/hp5065a/conn.htm .
>> For some, you will need to change the order of three pins by
>> resoldering. If you have a pin removal tool, you can merely move the
>> pins. Perhaps the seller can accommodate you in this case.
>>
>> I have no information on cables for 240 V ac 60 Hz or 220 V ac 50 Hz
>> at this time.  Contact me off list if you need these cables and I will
>> research them.
>>
>> WB0KVV
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe, go to
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe, go to
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
>>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>

-- 
-----------------------------------------------------------------------
Glenn Little                ARRL Technical Specialist   QCWA  LM 28417
Amateur Callsign:  WB4UIV            wb4uiv at arrl.net    AMSAT LM 2178
QTH:  Goose Creek, SC USA (EM92xx)  USSVI LM   NRA LM   SBE ARRL TAPR
"It is not the class of license that the Amateur holds but the class
of the Amateur that holds the license"




More information about the Time-nuts_lists.febo.com mailing list