[time-nuts] TimeSource 2500

Bob kb8tq kb8tq at n1k.org
Wed Nov 21 20:18:28 EST 2018


Hi

Do you have good reason to believe that it’s not DOA? 

It’s been a *long* time since these were common on the surplus market. I would not
be real surprised to find that what’s floating around has been through several owners
at this point. 

Bob

> On Nov 21, 2018, at 6:05 PM, Dmitry Khorkin <ekaninchen at gmail.com> wrote:
> 
> Recently i purchased Symmetricom's Timesource 2500  PRS, but can't find a
> way to communicate with it.
> Tried both straight and null-cables, RS232 and Craft interfaces but to no
> vail. There is no reply no matter what i send.
> 
> The only thing I was able to achieve is reading TL1 messages comming from
> the Craft port.
> 
> Can someone please share a copy of BTMon software or advise how else one
> can communicate with the device. Maybe description of the protocol, or
> structure of the message it expects.
> 
> Thanks in advance!
> 
> Best regards,
> Dmitry
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.




More information about the time-nuts mailing list