[time-nuts] Still looking for a schematic drawing for Oscilloquartz 8600-3 (945.860.011.03 S/N 422)

[Adrian Godwin]

Those are excellent images. Just needs a shot of the track side of the
larger board.

On Thu, Oct 25, 2018 at 8:38 PM Azelio Boriani <azelio.boriani at gmail.com>
wrote:

> Images of the 8600 can be found here:
> <http://www.leapsecond.com/museum/osa8600/>
> A paper on the 8607 BVA with the oven schematic is here:
> <http://rubiola.org/pdf-articles/conference/2007-ifcs-xtal-osa.pdf>
> Maybe it is similar to the 8600's oven.
> On Thu, Oct 25, 2018 at 8:26 PM paul swed <paulswedb at gmail.com> wrote:
> >
> > Ulf
> > I have no details. But perhaps off list we could reverse engineer it.
> > Simply a suggestion. Especially since you have it open.
> > Regards
> > Paul
> > WB8TSL
> >
> > On Thu, Oct 25, 2018 at 2:15 PM Bob kb8tq <kb8tq at n1k.org> wrote:
> >
> > > Hi
> > >
> > > Even with an “account”, most oscillator companies will not supply
> internal
> > > details on their product. That’s in part
> > > to protect their IP. It also reflects the complexity of tracing back to
> > > exactly what doc’s apply to an older unit. The
> > > normal drill is for you to send it back and they take a look at it.
> They
> > > then quote a repair charge and you either
> > > go ahead with it or have them send it back.
> > >
> > > Bob
> > >
> > > > On Oct 25, 2018, at 1:56 PM, Ulf Kylenfall via time-nuts <
> > > time-nuts at lists.febo.com> wrote:
> > > >
> > > >
> > > > Many monts ago I approached the list regarding an Oscilloquartz
> > > 8600-3(945.860.011.03 s/n 422) 5 MHz Ovenized Crystal Oscillator. It
> had
> > > aged and was 1 Hz off and couldnot be braught back to 5.000.000 MHz.
> > > > Since I did not have "an account" with Oscilloquartz or what they are
> > > calledtoday, I was not able to get any help from them.
> > > > There was one answer off the list from someone who could possibly
> > > helpbut that person either forgot or did not have any relevant
> > > informationto share.
> > > > A box with the dismantled unit has been laying on my shelf for months
> > > and I am therefore asking again. If there is no information about
> thisunit
> > > available I will scrap it. I do not know of any other forumto ask.
> > > > Best Regards
> > > >
> > > > Ulf KylenfallSM6GXV
> > > >
> > > > _______________________________________________
> > > > time-nuts mailing list -- time-nuts at lists.febo.com
> > > > To unsubscribe, go to
> > > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> > > > and follow the instructions there.
> > >
> > >
> > > _______________________________________________
> > > time-nuts mailing list -- time-nuts at lists.febo.com
> > > To unsubscribe, go to
> > > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> > > and follow the instructions there.
> > >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at lists.febo.com
> > To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> > and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>