[time-nuts] OCXO Board

[Bob Martin]

Bert,

   That looks like a useful board. Certainly some of the oscillators 
I'm giving away would fit nicely on it.  Since it looks like a two 
layer board, a quick check at pcbway.com puts the cost at $.79 
apiece at the 100 quantity exclusive of shipping.

Best,

Bob Martin

On 10/26/2018 4:17 AM, ew via time-nuts wrote:
> 
> 
> There recently was a request for an OCXO board. I did a layout, see attached and had Corby do his usual QC test.
> 
> 
> If some one is interested to make boards and maybe sell to other time nuts please contact me off list and I will get you code and possible suppliers.
> 
> Board does not have an amp  but could be added, if so, please advise, what should be added. Regardless what the direct output will remain
> 
> Bert Kehren
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>