[time-nuts] OCXO Board

ewkehren ewkehren at AOL.com
Fri Oct 26 20:19:07 UTC 2018


I have added OSA 8663 was not easy no more Please                         BertSent from my Galaxy Tab® A
-------- Original message --------From: Patrick Murphy <fgdhrtey at gmail.com> Date: 10/26/18  3:35 PM  (GMT-05:00) To: time-nuts at lists.febo.com Subject: Re: [time-nuts] OCXO Board Not to be a "me too", but I think there will be some interest for thisboard. Including a couple for me. :-)-Pat (KG5YPQ)>Dave wrote:>Yep!! Count me in for a few also!! maybe 4 or 5...>>Dave M>Wes wrote:> I'm not up to doing the whole project, but I would certain be> interested in 2 or 3 boards for sure.>> Wes Stewart N7WS>> On 10/26/2018 5:51 AM, Bob Martin wrote:>> Bert,>>>> That looks like a useful board. Certainly some of the oscillators>> I'm giving away would fit nicely on it. Since it looks like a two>> layer board, a quick check at pcbway.com puts the cost at $.79>> apiece at the 100 quantity exclusive of shipping.>>>> Best,>>>> Bob Martin>>>> On 10/26/2018 4:17 AM, ew via time-nuts wrote:>>>>>>>>> There recently was a request for an OCXO board. I did a layout, see>>> attached and had Corby do his usual QC test.>>>>>>>>> If some one is interested to make boards and maybe sell to other>>> time nuts please contact me off list and I will get you code and>>> possible suppliers.>>>>>> Board does not have an amp but could be added, if so, please>>> advise, what should be added. Regardless what the direct output>>> will remain>>>>>> Bert Kehren>>>>_______________________________________________time-nuts mailing list -- time-nuts at lists.febo.comTo unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.comand follow the instructions there.


More information about the Time-nuts_lists.febo.com mailing list