[time-nuts] Programmable clock for BFO use....noise
Mike Feher
mfeher at eozinc.com
Sat Sep 15 00:04:28 UTC 2018
Not when I built them in the late 60's and early 70's. All discrete. 73 -
Mike
Mike B. Feher, N4FS
89 Arnold Blvd.
Howell NJ 07731
848-245-9115
-----Original Message-----
From: time-nuts <time-nuts-bounces at lists.febo.com> On Behalf Of Richard
(Rick) Karlquist
Sent: Friday, September 14, 2018 7:15 PM
To: Discussion of precise time and frequency measurement
<time-nuts at lists.febo.com>; ed breya <eb at telight.com>
Subject: Re: [time-nuts] Programmable clock for BFO use....noise
>
> Finally, of course, you can use DDS. This is nearly an ideal case for
The trouble with a DDS is that you need a microcontroller with software just
to baby sit the thing.
Rick N6RK
_______________________________________________
time-nuts mailing list -- <mailto:time-nuts at lists.febo.com>
time-nuts at lists.febo.com To unsubscribe, go to
<http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com>
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list