[time-nuts] Programmable clock for BFO use....noise

[paul swed]

The beauty of a $2 arduino and a drop of code snitched from Engineer google.
OK enough of that back to the thread.
Regards
Paul
WB8TSL

On Fri, Sep 14, 2018 at 8:04 PM, Mike Feher <mfeher at eozinc.com> wrote:

> Not when I built them in the late 60's and early 70's. All discrete. 73 -
> Mike
>
>
>
> Mike B. Feher, N4FS
>
> 89 Arnold Blvd.
>
> Howell NJ 07731
>
> 848-245-9115
>
>
>
> -----Original Message-----
> From: time-nuts <time-nuts-bounces at lists.febo.com> On Behalf Of Richard
> (Rick) Karlquist
> Sent: Friday, September 14, 2018 7:15 PM
> To: Discussion of precise time and frequency measurement
> <time-nuts at lists.febo.com>; ed breya <eb at telight.com>
> Subject: Re: [time-nuts] Programmable clock for BFO use....noise
>
>
>
> >
>
> > Finally, of course, you can use DDS. This is nearly an ideal case for
>
>
>
> The trouble with a DDS is that you need a microcontroller with software
> just
> to baby sit the thing.
>
>
>
> Rick N6RK
>
>
>
> _______________________________________________
>
> time-nuts mailing list --  <mailto:time-nuts at lists.febo.com>
> time-nuts at lists.febo.com To unsubscribe, go to
> <http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com>
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/
> listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>