[time-nuts] 10 MHz -> 16 MHz

John Ackermann. N8UR jra at febo.com
Sun Sep 30 12:27:58 UTC 2018


The clockblock could do that, or probably any of the newer synth chips.  Phase noise and jitter are lousy of course.

On Sep 29, 2018, 11:58 PM, at 11:58 PM, Tom Van Baak <tvb at leapsecond.com> wrote:
>What's a clever, simple, reliable (pick 2 of 3) way to get 16 MHz out
>of 10 MHz? Low phase noise isn't a big requirement and jitter doesn't
>need to be sub-nanosecond. The main requirement is perfect cycle count
>accuracy. This is for driving a 16 MHz microcontroller from a 10 MHz
>Rb/Cs/GPSDO. 10 MHz input is likely sine; 16 MHz output is 3v3 or 5v
>CMOS.
>
>Thanks,
>/tvb
>
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at lists.febo.com
>To unsubscribe, go to
>http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>and follow the instructions there.



More information about the Time-nuts_lists.febo.com mailing list