[time-nuts] 10 MHz -> 16 MHz

[Pete Lancashire]

Same question 10 to 12:-)

On Sat, Sep 29, 2018, 8:58 PM Tom Van Baak <tvb at leapsecond.com> wrote:

> What's a clever, simple, reliable (pick 2 of 3) way to get 16 MHz out of
> 10 MHz? Low phase noise isn't a big requirement and jitter doesn't need to
> be sub-nanosecond. The main requirement is perfect cycle count accuracy.
> This is for driving a 16 MHz microcontroller from a 10 MHz Rb/Cs/GPSDO. 10
> MHz input is likely sine; 16 MHz output is 3v3 or 5v CMOS.
>
> Thanks,
> /tvb
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>