[time-nuts] GPS Antennas

[Bryan _]

Or a mfg. defect and thus why on the surplus market.

-=Bryan=-

________________________________
From: time-nuts <time-nuts-bounces at lists.febo.com> on behalf of Denny Page via time-nuts <time-nuts at lists.febo.com>
Sent: August 29, 2019 7:39 PM
To: Discussion of precise time and frequency measurement <time-nuts at lists.febo.com>
Cc: Denny Page <dennypage at me.com>
Subject: Re: [time-nuts] GPS Antennas

I think several people have run into that issue, including myself. It seems designed for a slightly tapered rod. Easy to fix with the right tool.

Denny

> On Aug 29, 2019, at 16:41, Ben Hall <kd5byb at gmail.com> wrote:
>
> Only issue with mine was that the thread wasn't fully cut, so I modified an old taper tap to be a bottoming tap with the bench grinder and finished tapping the hole to the bottom.


_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.