[time-nuts] Aerial coax downlead placement

[Peter Vince]

On Fri, 5 Jul 2019 at 18:01, WigglePig <wigglepig at gmail.com> wrote:

> If there are currents in the braid to upset then your antenna system is
> not working as you might believe.
>

I was working on the simplistic assumption that for a current to flow,
there must be a complete circuit, so the current flows down the centre
conductor, and must come back up the braid.  But I gather that unlike DC,
RF is "black magic", and only flows on the inside of the braid - if all the
impedances match.