[time-nuts] Distribution amplifier for 10MHz
Charles Steinmetz
csteinmetz at yandex.com
Sun Mar 17 03:57:49 UTC 2019
Dave M wrote:
> Excellent advice from Charles, especially concerning isolation criteria.
> Should you be looking to distribute a standard 10 MHz frequency to various bench instruments, I'd recommend that you take a look at Extron video distribution amps. Several models on Ebay right now, at reasonable prices.
One particular series of Extrons is the subject of the modification
instructions in my second link.
One caveat -- there are at least two "generations" of Extron video DAs.
Some have discrete circuits, and some are built using high-speed,
high-current opamps (the now-obsolete Comlinear CLC409).
The discrete circuits are all unmitigated CRAP. Horrible video DAs,
unworkable as 10MHz/+13dBm DAs without major efforts and headaches.
Absolutely not recommended.
So, if you intend to convert an Extron video DA for 50 ohm use, make
sure it is one based on high-speed opamps.
To make everything just that little bit more fun, *NOTE* that Extron
used some model numbers for first-generation discrete products and
*re-used* the same model numbers for later-generation opamp products.
One product number I'm sure this is true of is "ADA 3 180." Another may
be "ADA 3 80."
I'm pretty sure that all of the models named on the cover page of my
modification instructions are opamp-only.
Best regards,
Charles
More information about the Time-nuts_lists.febo.com
mailing list