[time-nuts] multimeter

[Bob kb8tq]

Hi

Also depends a bit on why you are shopping. If the answer is “lost the second one this year”
then the debate over holding calibration likely isn’t of much relevance. If the answer is that the 
nixie tubes in the prior unit finally got to dim to read …. not quite the same issue. 

Bob

> On Mar 23, 2019, at 6:49 PM, Jim Harman <j99harman at gmail.com> wrote:
> 
> jim77742 at gmail.com said:
>> I think I'm in the market for a new digital multimeter.
>> Could I have some recommendations?
> 
>> 
>> It all depends on whether you are checking for a bad power supply or
> testing the linearity of a 24 bit DAC.
> 
> For the former, I find a built-in clamp type AC/DC ammeter with a
> reasonably sensitive range (40 A or less) is very handy. My current
> favorite is the Mastech MS2108, from Amazon.
> 
> -Jim Harman
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.