[time-nuts] multimeter

[Jim Palfreyman]

Hi All,

Thanks so much everyone for your comments. I especially liked "get the
orange one". Because that's what I did get (I think it's orange - could be
yellow).

I was deliberately vague (apologies) but I just wanted a broad response.
Which I got.

I've settled on the Fluke 87V. It's on it's way.

Jim


On Sun, 24 Mar 2019 at 12:00, Bob Albert via time-nuts <
time-nuts at lists.febo.com> wrote:

>  I have a cheap Chinese clamp-on power line ammeter I use occasionally.
> Its lowest range is 20 A I think but I built a 10:1 expander (very
> simple).  I also built a line separator so I can grip just one line.
> Bob
>     On Saturday, March 23, 2019, 5:00:23 PM PDT, Jim Harman <
> j99harman at gmail.com> wrote:
>
>  jim77742 at gmail.com said:
> > I think I'm in the market for a new digital multimeter.
> > Could I have some recommendations?
>
> >
> > It all depends on whether you are checking for a bad power supply or
> testing the linearity of a 24 bit DAC.
>
> For the former, I find a built-in clamp type AC/DC ammeter with a
> reasonably sensitive range (40 A or less) is very handy. My current
> favorite is the Mastech MS2108, from Amazon.
>
> -Jim Harman
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>