[time-nuts] Yet another GPSDO project.

[Tobias Pluess]

Hi Leo,

sorry for my late reply.
I have not yet measured the phase noise of my finished unit, since I am still waiting to complete my phase noise measurement equipment.
However, I have a decent test report for my OCXO, where the phase noise spectrum is also plotted. I don't expect my distributor circuit which I connected to the OCXO to degrade the phase noise too much since it is just a bunch of OpAmps and resistors.
I have a HP 8663A here for comparison, but I still lack a proper phase noise test set.

Tobias


________________________________________
From: time-nuts [time-nuts-bounces at lists.febo.com] on behalf of Leo Bodnar [leo at leobodnar.com]
Sent: Thursday, March 21, 2019 09:14
To: time-nuts at lists.febo.com
Subject: Re: [time-nuts] Yet another GPSDO project.

Tobias,
Have you measured resulting phase noise of the finished unit?
Thanks
Leo

> From: Tobias Pluess <tobias.pluess at xwmail.ch>
> sure, I believe you since my primary requirement was phase noise. This is because I'd like to use the OCXO as reference for my spectrum analyzer and also for my HP 8663 signal generator to do phase noise measurements
_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.