[time-nuts] FTS 1050A Service Manual

[Tom Knox]

I agree Bob, I have seen many different versions, I have even seen one with option BVA (In a 1000B form-factor) and versions with 10MHz external ref input. But any schematic or service manual would be a great staring point even if a different version.


Tom Knox

"Peace is not the absence of violence, but the presence of Justice" Both MLK and Albert Einstein

________________________________
From: time-nuts <time-nuts-bounces at lists.febo.com> on behalf of Bob kb8tq <kb8tq at n1k.org>
Sent: Saturday, May 4, 2019 5:00 PM
To: Discussion of precise time and frequency measurement
Cc: Jeff Kruth
Subject: Re: [time-nuts] FTS 1050A Service Manual

HI

I suspect that as long as the 1050 has been around …. there are mulitple versions of the schematics.
I doubt there ever *was* a service manual. It likely was a “factory repair only” sort of device.

Bob

> On May 4, 2019, at 5:53 PM, Jeff Kruth via time-nuts <time-nuts at lists.febo.com> wrote:
>
> Hello!
> Does anyone know where I might find the service manual (schematics particularly) for the FTS 1050A Quartz Oscillator? PDF, printed, scratched on papyrus, etc.?
> N8UR sent me the operating manual, but I need a little more detail.MicroSemi owns the stuff now and I have not contacted them, you know how it goes with acquisitions.....Thanks!  Jeff Kruth
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.


_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.