[time-nuts] Cold Rubidium over hyped?
Bob kb8tq
kb8tq at n1k.org
Sat Nov 9 15:46:09 UTC 2019
Hi
> On Nov 8, 2019, at 11:18 PM, cdelect at juno.com wrote:
>
> The pressure sensitivity for a classic design can easily be eliminated.
>
> I'm pretty sure that the old Varian R20 cell was mostly immune.
>
> Either using the R20 design or stiffer convex ends in a modern design
> would work.
>
> Also a sealed optical unit has been used to get rid of the pressure
> problem.
OCXO’s have a pressure sensitivity as well. There, the only real answer
is a welded enclosure. Anything short of that simply integrates the pressure
via low leak rates and makes things even stranger …..
Bob
>
> Any of these methods would be trivial in a new design.
>
> The Rb/glass absorption is mostly in the lamp, when using the proper
> glasses in the cell and using similar lasers to what the cold standard
> uses eliminates that.
>
> Newer RF architecture would also help, NLDL multiplier, low noise
> synthesis, etc.
>
> My main gripe was that either they were either intentionally reducing the
> performance of their masers or using a setup that did not do justice to
> them.
>
> Cheers,
>
> Corby
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list