[time-nuts] BG7TBL FA1 frequency analyzer

[Christoph Kopetzky]

Hi Anders,

thank you for providing your graphics. Very interesting.
I will put my results to my github repository if done.  Right now I have 
to take a break for my surgery.

best regards

Chris
---
'Everything should be made as simple as possible, but not simpler.' -- Albert Einstein

Am 06.09.2019 um 12:02 schrieb Anders Wallin:
>> If I am able to connect TimeLab with my FCA3103 in the future I also
>> want to compare this TIC with the
>> FA1 and TSA3011. Also important would be the fact whether the 'cheaper'
>> versions could be used to measure phase
>> noise as the TimePod 5330A or the PhaseStation 53100A devices and how
>> 'low' they are going to do the job...
>>
> FWIW phase-noise floors with: FSW8, 3120A, and 5115A: ( USRP B210 @ 100 MHz
> is also done, to be added..)
> http://www.anderswallin.net/wp-content/uploads/2016/03/phase_noise_WR.png
> if you make some repo (github?) for these measurements and noise-floors
> then I can try to dig out the old data and contribute.
>
> 53230A adev-floors
> http://www.anderswallin.net/wp-content/uploads/2015/04/Keysight_53230A_noise_floor.png
> and RCON mode:
> http://www.anderswallin.net/wp-content/uploads/2015/06/RCON_vs_CONT.png
>
> Anders
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.