[time-nuts] 15Mhz in 10MHz out?

[paul swed]

I did look at my notes I only have the ocxo version no RB. There is a tap
point that delivers 10 MHz. This needs to be buffered and filtered. Both
easily done.

Paul
WB8TSL

On Wed, Sep 18, 2019 at 10:09 AM Bruce Griffiths <bruce.griffiths at xtra.co.nz>
wrote:

> Dual JK flipflop configured as divide by 3 producing a 33% duty cycle 5MHz
> output which is filtered to extract the 10MHz second harmonic component.
>
> Bruce
> > On 18 September 2019 at 21:08 "David C. Partridge" <
> david.partridge at perdrix.co.uk> wrote:
> >
> >
> > Having seen the recent discussion of the NB3N502 and other PLLs for
> > frequency multiplication.  I'm wondering if anyone knows of a similar
> > *small* IC that will convert 15MHz to 10MHz ?
> >
> > Why? My current modifications to the KS24361 output 10Mhz signals
> regardless
> > of whether the unit has lock.   ISTR that the original 15MHz output was
> only
> > enabled when the unit had lock.   I'd like to redo the PCB which I put in
> > place of the 15MHz band-pass filter and replace it with one that takes
> 15Mhz
> > an outputs 10Mhz.
> >
> > Thanks
> > David
> >
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at lists.febo.com
> > To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> > and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>