[time-nuts] 15Mhz in 10MHz out?
Bob kb8tq
kb8tq at n1k.org
Wed Sep 18 17:02:53 UTC 2019
Hi
Why not just grab the “lock” signal and use that to disable your existing
10 MHz output? That sounds like a lot less work.
Bob
> On Sep 18, 2019, at 3:08 AM, David C. Partridge <david.partridge at perdrix.co.uk> wrote:
>
> Having seen the recent discussion of the NB3N502 and other PLLs for
> frequency multiplication. I'm wondering if anyone knows of a similar
> *small* IC that will convert 15MHz to 10MHz ?
>
> Why? My current modifications to the KS24361 output 10Mhz signals regardless
> of whether the unit has lock. ISTR that the original 15MHz output was only
> enabled when the unit had lock. I'd like to redo the PCB which I put in
> place of the 15MHz band-pass filter and replace it with one that takes 15Mhz
> an outputs 10Mhz.
>
> Thanks
> David
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list