[time-nuts] FA2 counter
Mark Sims
holrum at hotmail.com
Fri Sep 27 01:25:18 UTC 2019
Miy FA2 came in today. A very quick test shows that it works. It does not appear to have the -0.0002 Hz freq measurement bias that the FA1 has.
The 0.1 second gate time mode is pretty useless... there appears to be a 300 msec dead time between measurements in 0.1 (and 10 sec) gate time modes so you only get a new reading every 400 msecs. 10 second gate time produces a reading every 10300 msecs. 1 sec gate time outputs readings every 1100 msecs (like the FA1).
It auto-detects the presence of an external reference... no way to manually switch between internal and exterrnal references. I have not done any testing on the internal ref or the high freq channel.
The screen shows a LPF setting and a 50 ohm setting... no idea if these are switchable.... there is no documentation.
The screen shows the input signal level.
More information about the Time-nuts_lists.febo.com
mailing list