[time-nuts] Fluke 164H counter question - Thanks!!!

[Tom Knox]

Hi Time-Nut;
I am sure someone has asked before, and I know the question will be asked in the future. Does anyone know how to enter the calibration menu on a Fluke 164H Multi-Function Counter? Does it require a code? I know the Scopemeters from this generation 9/99/105 series use a external 12 volts applied to the two pins in the battery compartment. Cannot seem to find a cal and service manual.
If you are unfamiliar with these, it is a really nice counter, they have amazing performance for a handheld.
Below is a link for a data sheet if you are interested:
https://www.used-line.com/Specs_URL/85/85.pdf
Fluke 164 - Used-Line.com<https://www.used-line.com/Specs_URL/85/85.pdf>
Accurate Phase Measurements Figures 3a and 3b show how a Multi-Function Counter performs, where by contrast both a Phasemeter and a scope or DVM would be required.
www.used-line.com

Thanks!!

Tom Knox

303-554-0307

actast at hotmail.com

"Peace is not the absence of violence, but the presence of Justice" Both MLK and Albert Einstein