[time-nuts] Frequency standards for different tau in Allen Dev measurement

[Robert DiRosario]

SDRs (Software Defined Radio) decimate / downsample.  Look at SDR 
documentation.

Google turns up: https://dspguru.com/dsp/faqs/multirate/decimation/

Robert

On 02/21/2020 03:09 PM, Gary E. Miller via time-nuts wrote:
> Yo Magnus!
>
> On Fri, 21 Feb 2020 20:33:46 +0100
> Magnus Danielson via time-nuts <time-nuts at lists.febo.com> wrote:
>
>> As one decimate data, one needs to be very very careful with
>> bandwidth. It would make biases in values which would over-state
>> stability. Yes, we have seen it happen. Even big names has come clean
>> and confessed doing it wrong when they decimated the data.
> Anyone have any references to how to decimate properly?
>
> RGDS
> GARY
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
> 	gem at rellim.com  Tel:+1 541 382 8588
>
> 	    Veritas liberabit vos. -- Quid est veritas?
>      "If you can't measure it, you can't improve it." - Lord Kelvin
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.