[time-nuts] 5.115 MHz / 10.23 MHz wanted

[Azelio Boriani]

krystaly.cz hosts also a collection of crystal oscillators' and oven
controllers' schematics:

<http://www.krystaly.cz/files/download/Amaterske_radio_1987-02-Krystaly.pdf>

On Wed, Feb 26, 2020 at 10:37 AM Clint Jay via time-nuts
<time-nuts at lists.febo.com> wrote:
>
> I have seen 10.23 parts somewhere but can't remember the application.
>
> If you can't track one down there's still a couple of reasonably priced
> options for custom crystals, you can have them ground by a czech company,
> www.krystaly.cz/en
>
> On Wed, 26 Feb 2020, 09:26 Tom Van Baak via time-nuts, <
> time-nuts at lists.febo.com> wrote:
>
> > For a DIY project I'd like a 5.115 MHz OCXO. That weird-looking number
> > is half the basic 10.23 MHz GPS chip rate.
> >
> > I realize it's trivial to create 5.115 MHz with a DDS chip, a function
> > generator, synthesizer, or even an aggressive phase microstepper. But in
> > this case, if possible, I'd prefer a simple single part; a plain old XO
> > or OCXO solution. Do any of you know where to get a 5.115 MHz crystal or
> > oscillator?
> >
> > I'm pretty sure that I've seen one-off surplus 10.23 MHz or 5.115 MHz
> > OCXO on eBay but I never thought to bid on them because the frequency
> > was strange. If you saw one, and "bought before you thought", let me know.
> >
> > Thanks,
> > /tvb
> >
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at lists.febo.com
> > To unsubscribe, go to
> > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> > and follow the instructions there.
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.