[time-nuts] Any (relatively) cheap TSIP GPS receivers without WNRO out there?
Björn
bg at lysator.liu.se
Sun Jan 12 09:10:02 UTC 2020
Hi Skip,
Are your NTP-server using the Palisade ref clock driver?
http://doc.ntp.org/current-stable/drivers/driver29.html
If it’s using the event-poll mode you might need a receiver supporting that. I have not seen that outside the Palisade/Accutime family.
Can you fudge the time1 all the way up to 1024wk (translated into seconds) to compensate for the wnro with your current receiver?
# Set packet delay
fudge 127.127.29.0 time1 0.020
-
Björn
Sent from my iPhone
> On 12 Jan 2020, at 04:55, Skip Withrow <skip.withrow at gmail.com> wrote:
>
> I have an NTP server that uses a Trimble GPS receiver (Accutime 2000,
> p/n - 39091-00, ROM 3.06) that has fallen prey to WNRO. Just
> wondering if there are any Trimble (or other brand) receivers that
> have TSIP serial comms that are available for a reasonable price? Any
> help appreciated.
>
> Skip Withrow
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list