[time-nuts] Thunderbolt power requirements
Bob kb8tq
kb8tq at n1k.org
Fri Jan 31 19:22:10 UTC 2020
Hi
> On Jan 31, 2020, at 2:16 PM, Brian Lloyd <brian at lloyd.aero> wrote:
>
> On Fri, Jan 31, 2020 at 12:17 PM Bob kb8tq <kb8tq at n1k.org> wrote:
>
>> Hi
>>
>> The better you regulate the 12V, the better the TBolt will function.
>> The OCXO will be very unhappy outside a +/- 0.5V region. It really
>> wants something well regulated (like at the couple of millivolts level).
>>
>
> That is the info I was looking for. My T-bolt works very well but all three
> supplies are regulated. So I have to come up with regulated +12V and -12V.
The -12 can be just about anything. Moving it from -10 to -12 has virtually
no effect at all on the output. You need to regulate the +5 and +12.
Bob
>
> Depending on exactly what era OCXO your TBolt has in it and how well
>> it is still functioning, ppb level changes for a few percent delta supply
>> are
>> not unexpected.
>>
>
> My T-bolt does seem to be working well, at least when compared to the Rb
> and my TCXO-based GPSDO. All three seem to be quite consistent. 10MHz from
> the NTP server is not as stable as the other 3. The 1pps from the NTP
> server wanders +/- 50ns from the 1pps from the T-bolt. All are running from
> the same GPS antenna outdoors with a pretty much unobstructed view of the
> sky. (I have some trees and the peak of my roof up to about 20 degrees
> above the horizon to the S.)
>
> Thanks Bob.
>
> --
>
>
>
> Brian Lloyd
> 706 Flightline
> Spring Branch, TX 78070
> brian at lloyd.aero
> +1.210.802-8FLY (1.210.802-8359)
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list