[time-nuts] Microsemi XLi SAASM

[Steve - Home]

Absolutely, but I’m hoping the XLi, like some of the later receivers, has a method to select the antenna voltage. 

Steve




> On Mar 27, 2020, at 8:06 PM, Dana Whitlow <k8yumdoober at gmail.com> wrote:
> 
> You could easily do what you want without modifying the receiver, using a
> 7805 or similar
> regulator and a pair of bias tees, inserted in the transmission line from
> the antenna.
> 
> Dana
> 
> 
>> On Fri, Mar 27, 2020 at 7:33 PM Steve - Home <steve-krull at cox.net> wrote:
>> 
>> I wondered if anyone has a user and/or service manual for the XLi SAASM?
>> Or any of the option modules? The one I received appears to have had the L2
>> receiver removed. I’d also like to see if there’s a jumper or software
>> setting to change the antenna supply voltage from 12v to 5v.
>> 
>> Thanks for any assistance!
>> 
>> Steve
>> 
>> 
>> 
>> 
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe, go to
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
>> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.