[time-nuts] Bourns for fine frequency tuning
Matthias Welwarsky
time-nuts at welwarsky.de
Tue May 12 09:24:39 UTC 2020
Hi,
The Bourns 3700S series is still available, a 100k Ohm part is this:
https://www.mouser.de/ProductDetail/Bourns/3700S-1-104L?qs=
%2Fha2pyFadujnek9uGXX64FiPDt0iEW4%2F27z9APd4XbI%3D[1]
regards,
Matthias
On Dienstag, 12. Mai 2020 11:03:02 CEST timeok at timeok.it wrote:
> Hi everyone,
>
> I need your help to find a particular Bourns potentiometer that many
> frequency standard company use for frequency fine tuning in their
> oscillators. In my experience, both HP in 107BR and Frequency Electronics
> in the AN URQ-23 use this potentiometer which has a value of 100k Ohm.
>
> Unfortunately I can't replace it with other models and by doing some
> research I found some but at most with a resistance of 10K Ohm. I need two
> pieces, but if I find more, I would keep them in reserve. The problem with
> these multiturns is that the back cover comes off and no longer work. Some
> can be glued again, others are damaged internally in the cursor because the
> operator insisted trying to force the spindle. In the case of the HP107BR
> the potentiometer is installed in the external oven and the temperature has
> accentuated the gluing problem. In this regard, suggestions on which glue
> can be used for high temperatures are welcome.
>
> The model is: Bourns 3700S-196-1004
>
> thanks,
>
> Luciano
>
> Luciano P. S. Paramithiotti
> timeok at timeok.it
> www.timeok.it
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow
> the instructions there.
--------
[1] https://www.mouser.de/ProductDetail/Bourns/3700S-1-104L?qs=
%2Fha2pyFadujnek9uGXX64FiPDt0iEW4%2F27z9APd4XbI%3D
More information about the Time-nuts_lists.febo.com
mailing list